Features and Specifications Manual C - 83
Cordless Telephone Connection
C-23
FEATURE
DESCRIPTION
Using an ADA(2)-W(BK)/(SW) Unit for Electra Professional terminals or APR/
APA-U Unit for Electra Elite terminals, a cordless telephone (2500-type) can
be connected to a Multiline Terminal. System Programming defines whether or
not the cordless telephone rings when calls are directed to the Multiline
Terminal associated with it. The SLI(8)-U10 ETU also supports cordless
telephones, but this feature refers to Multiline Terminal cordless connection.
System Software S5500 or higher, allows a hookflash from a Single Line
Telephone connected to an APR/APA-U Unit.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals with ADA(2)-W(BK)/(SW) Unit or APR/APA-U Unit
installed.
Required Components:
2500-type cordless Single Line Telephone
OPERATING
PROCEDURES
1. Go off-hook.
2. Dial the station number or dial the Trunk Access Code and telephone
number.
When the Multiline Terminal is ringing, the incoming call can be answered
by the cordless Single Line Telephone user by going off-hook, when
ringing line preference is assigned for the Multiline Terminal.
To make a call using a cordless Single Line Telephone:
To answer a call using a cordless Single Line Telephone:
To Next Page
Loading...