Features and Specifications Manual S - 7
Secondary Incoming
Extension
S-3
FEATURE
DESCRIPTION
A Secondary Incoming Extension (SIE) can be assigned on a Flexible Line
key. The status is indicated by the LED of the assigned SIE. An incoming
internal, ringing Tie/DID, DIT/ANA, CO Transfer Ring, or call forwarded call
can be picked up from an SIE.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Receive an incoming ringing call on a Secondary Incoming
Extension key.
2. Press the Secondary Incoming Extension key or go off-hook when
Ringing Line Preference is assigned, and receive the call.
3. Talk with party. (Normal call handling procedures apply.)
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to
assign any or all line keys as Secondary Incoming Extensions (LK 9 LED
On).
Use Memory Block 4-37 [Extension Line Key Ring Assignment (Day
Mode)] or 4-38 [Extension Line Key Ring Assignment (Night Mode)] to
specify separate Day or Night Mode ringing assignment.
Use Memory Block 4-41 (SIE/CAR Ringing Line Preference Selection) to
specify whether to allow (default: YS) or deny (NO) Ringing Line
Preference (go off-hook or press Speaker key) on all telephones
assigned to SIE.
To answer a secondary incoming extension call:
To Next Page
Loading...