NEC Electra Elite 48/192 - Speed Dial Stored Characters

Features and Specifications Manual S - 31
Speed Dial Stored Characters
S-11
FEATURE
DESCRIPTION
Speed Dial buffers may contain 24 digits. When 100-memories (80 System
Speed Dial buffers and 20 Station Speed dial buffers) are allocated, a
maximum of 13 characters can be entered for the name. When 1000-
memories are allocated, a maximum of 12 characters can be entered for the
name.
System Software S4000 or higher permits input stored characters to be
entered on the dial pad, but does not allow the Character Code Table to
be used.
SYSTEM
AVAILABILITY
Terminal Type:
All Display Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Press
T
.
2. Press
Q
.
3. Dial the Station Speed Dial buffer number to be programmed
(
HK
~
II
).
4. Dial the Trunk or Trunk Group Access Code (maximum four digits).
5. Dial the desired telephone number.
6. Press
U
, and enter name using the Character Code Table.
- OR -
7. Use the dial pad to enter the name.

Refer to S-11 Speed Dial Stored Characters.
8. Press
T
.
To program a Station Speed Dial buffer with stored characters: