NEC Electra Elite 48/192 - Page 537

S - 32 Speed Dial Stored Characters
Issue 6 Electra Elite
1. Press
T
.
2. Press
Q
.
3. Dial the System Speed Dial buffer number to be programmed
(
KK
~
GI
or
KKK
~
III
).
4. Dial the Trunk or Trunk Group Access Code (maximum four
digits).
5. Dial the desired telephone number.
6. Press
U
, and enter name using the Character Code Table.
- OR -
7. Use the dial pad to enter the name.

Refer to S-11 Speed Dial Stored Characters.
8. Press
T
.
Key Function:
1. Press the desired CO/PBX line key.
2. Press
Q
.
3. Dial the Speed Dial buffer number (
KK
~
II
or
KKK
~
III
).
Multifunction (Dial Access):
1. Press
Q
.
2. Dial the Speed Dial buffer number (
KK
~
II
or
KKK
~
II
I
).
To program a System Speed Dial buffer with stored characters
(Attendant Position only at default):
Using a Speed Dial buffer with stored characters: