Electra Elite Issue 6
Features and Specifications Manual S - 33
Key Function:
1. Press the desired CO/PBX line key.
2. Press the desired Feature Access key.
Multifunction (Dial Access):
Press the desired Feature Access key.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-1-33 (Speed Dial Number/Name Display
Selection) to assign the NAME or Number (default: DIAL) to be
displayed first.
Use Memory Block 1-1-35 (Speed Dial Buffer Allocation) to assign
The 100-memory System (80) and Station (20) Speed Dial Mode or
1000-memory System Speed Dial Mode. Default is 100.
Restrictions:
One-Touch keys, programmed as Station Speed Dial, cannot have a
name stored with the number to dial.
General:
When programming Feature Access or One-Touch keys, the
Conference key can be used to backspace and erase an entry.
Stored characters can only be entered for outside line numbers.
RELATED FEATURES
LIST
Using the Feature Access key for Station Speed Dial with stored
characters:
Feature
Number
Feature Name
F-2 Feature Access - User Programmable
N-1 Nesting Dial
S-10 Speed Dial - Station
A-12 Speed Dial - System
To Next Page
Loading...