Features and Specifications Manual H - 13
Hot Line
H-6
FEATURE
DESCRIPTION
Hot Line enables a station user to go off-hook to automatically dial an outside
number or another station. This feature is provided for Multiline Terminals and
Single Line Telephones.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Lift the handset to go off-hook, or press
P
.
2. The station or outside number is called.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 4-23 (Prime Line/Hot Line Assignment) to enable
access to the Hot Line feature when going off-hook. Default is not
specified.
General:
Only hardware abilities limit the number of Hot Lines that can be
supported in the system.
Up to 10 digits can be stored for dialing, including Trunk Access Codes.
Multiline Terminal users assigned Hot Line can press the Feature key
and Access Code 6
,
or press Feature + Speaker to receive internal dial
tone.
With Hot Line assigned, internal dial tone can be received by pressing
the Hold, Conference, or Transfer key.
To execute at any station programmed for Hot Line:
To Next Page
Loading...