Features and Specifications Manual A - 21
Ancillary Device Connection
A-7
FEATURE
DESCRIPTION
Ancillary Device Connection allows installation of selected peripheral
(ancillary) devices to a Multiline Terminal. This feature enhances peripheral
device objectives.
An Electra Elite Terminal user can accomplish this by using the APR-U Unit
(Analog Port Adapter with Ringer) or APA-U Unit (Analog Port Adapter without
Ringer) for analog telephone devices, installing the HFU-U Unit to have a full
duplex speakerphone, or installing the ADA-U Unit to connect devices such as
tape recorders.
The APA-U Unit is the interface for installing a Single Line Telephone, Modem,
Credit Card Reader, Wireless Headset, NEC Voicepoint/Voicepoint Plus
Conferencing unit or other compatible analog device.
An Electra Professional terminal user can install the ADA(1)-W(BK)/(SW) Unit
to connect headset or tape recorder or install the ADA(2)-W(BK)/(SW) Unit to
connect an SLT Cordless Telephone.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals except DTP-2DT-1(WH)
Required Components:
APR-U Unit, APA-U Unit, HFU-U Unit, ADA-U Unit, ADA(1)-W Unit, or
ADA(2)-W Unit
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-1-02 (Hookflash Time Selection) to specify the loop
open time for a hookflash signal sent to the CO/PBX when the recall key
on a Multiline Terminal is pressed.
Depend on the connected ancillary device.
To Next Page
Loading...