Features and Specifications Manual P - 25
Pushbutton Dial - DTMF or DP
P-11
FEATURE
DESCRIPTION
Pushbutton Dial - DTMF or DP is provided on all Single Line Telephones and
outside lines. Tie Lines are assigned per trunk to generate either Dual-Tone
Multifrequency (DTMF) or Dial Pulse (DP) dialing signals.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals with a push button dial pad
Required Components:
TLI(2)-U10 ETU
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify the
TLI(2)-U10 ETU.
General
DTMF or DP programming is per Tie line trunk.
Single Line Telephones that are installed can be Push Button DTMF or
DP (rotary dial).
Default assigns DTMF signaling to all trunks and Single Line Telephone
ports.
DTMF tone can be sent from Multiline Terminals to Dial Pulse trunks.
Loop Start/Ground Start trunks are DTMF only.
None
To Next Page
Loading...