Features and Specifications Manual C - 77
CO/PBX, Tie Line
Digit Restriction
C-20
FEATURE
DESCRIPTION
CO/PBX, Tie Line Digit Restriction eliminates unauthorized calls by restricting
the number of digits that can be dialed from a station on an outside line.
SYSTEM
AVAILABILITY
Terminal Type:
All stations
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 4-32 (Trunk Digit Restriction) to specify the maximum
number of digits per station that can be dialed while on any outside line
(default: 00, No Limit).
Use Memory Block 1-1-69 (Tie Line Code Restriction Assignment) to
assign YS before this feature works on Tie Lines.
When Class Selection is set to YS using Memory Block 1-1-62 (System
Speed Dial Override by Class Selection), CO/PBX, Tie Line Digit
Restriction is not applied.
Restrictions:
Code Restriction must be assigned to the station before this feature is
used.
Single Line Telephone users cannot be restricted by CO/PBX, Tie Line
Digit Counting after the PBR is released because the DTMF dial signals
are sent to the outside line from the Single Line Telephone.
None
To Next Page
Loading...