Features and Specifications Manual M - 15
Music on Hold
M-7
FEATURE
DESCRIPTION
A locally provided music source or an internal music source can be used to
supply music to parties on hold, to assure them that they are still connected to
the system.
System Software S4000 or higher is required to allow CO ports to
provide multiple music sources to different COs in the system.
SYSTEM
AVAILABILITY
Terminal Type:
Not applicable
Required Components:
External source connected to the RCA jack on the basic B64-U10 KSU or
MOH jack on the MBD-U10 Unit in the B48-U10 KSU.
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-8-09 (Music on Hold Pattern Selection) to select
the Music on Hold pattern (default: A).
Use Memory Block 1-8-31 (Hold Tone Source Assignment) to assign the
internal (default: INT) or external (EXT) Music on Hold source.
Use Memory Block 1-8-32 (Hold Interval Tone Volume Selection) to pad
the Music (default: 0 dB) by -6dB when the Internal source is used.
General:
Music On Hold (MOH) is provided for all outside and internal calls on
hold.
Music On Hold can be disabled if required.
None
To Next Page
Loading...