Features and Specifications Manual R- 11
Resident System Program
R-5
FEATURE
DESCRIPTION
When power is supplied to the system, the hardware configuration is scanned
and Resident System Program default values are assigned. This enables
immediate operation, even before the system is programmed to accommodate
the individual site requirements.
SYSTEM
AVAILABILITY
Terminal Type:
Not applicable
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
General:
Default assignments for Multiline Terminals are as follows:
LK 01~ LK 08 corresponds to CO 01~ CO 08.
Default assignments for Attendant Add-On Consoles are as follows:
• DSS1 Port 1
• DSS 2 Port 2
• DSS 3 Port 1
• DSS 4 Port 2
None
To Next Page
Loading...