Features and Specifications Manual M - 7
Multiline Conference Bridge
M-4
FEATURE
DESCRIPTION
DESCRIPTION Multiline Conference Bridge allows any intercom or outside caller to call the
CNF(8)-U10 ETU to place a multiparty conference call. Each CNF(8)-U10
ETU supports one 8-party conference or two 4-party conferences regulated by
a switch setting. Two CNF(8)-U10 ETUs may be installed. DSP based
amplification provides a higher quality conference call. This new feature can
be used with any version of software on the Electra Elite 48- or 192-port
system.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
CNF(8)-U10 ETU
SETUP
PROCEDURES
1. Call the Conference Bridge extension number, and wait for the voice
prompt.
2. Dial the default Supervisor Password (
KKKK
), then dial
L
.
3. Follow the voice prompt, and enter the setting verification mode
(
L
). Then enter system set mode.
4. Follow the voice prompt to change Supervisor Password (4~8 digits).
To set the Supervisor Password:
To Next Page
Loading...