M - 8 Multiline Conference Bridge
Issue 6 Electra Elite
1. Call the Conference Bridge extension number, and wait for the
voice prompt.
2. Dial the default Supervisor Password (
KKKK
), then
dial
L
.
3. Skip the steps until Conference Setup mode is available for
conference 1 or conference 2.
4. Follow the voice prompt, and set the conference 1 or the
conference 2 password (4~8 digits).
1. Call the Conference Bridge extension number, and wait for the
voice prompt.
2. Dial the default Supervisor Password (
KKKK
), then
dial
L
.
3. Skip options until the Customized Greeting option is selected.
4. Follow the voice prompt and record new a Customized Greeting.
OPERATING
PROCEDURES
1. Call the Conference Bridge extension number.
2. When you hear the voice prompt, enter the Conference Bridge 1
or 2 password, and dial
L
.
3. Start the conference.
1. Call DID number for the Conference Bridge.
2. When the voice prompt is heard, enter the Conference Bridge 1
or 2 password, and dial
L
.
3. Start the conference.
To set the Conference 1 and/or the Conference 2 Password:
To record new Customized Greeting:
To start a Conference Call at an internal extension:
To start a conference call using outside DID:
To Next Page
Loading...