Electra Elite Issue 6
Features and Specifications Manual M - 9
1. Call a trunk that is set as DIT to Conference Bridge.
2. When the voice prompt is heard, enter the Conference Bridge 1
or 2 password, and dial
L
.
3. Start the conference.
1. Call a trunk that is set as an Automated Attendant.
2. Select the option for an extension connected to the Conference
Bridge.
3. When the voice prompt is heard, enter the Conference Bridge 1
or 2 password, and dial
L
.
4. Start the conference.
1. Call the Attendant, and ask to be transferred to an extension
connected to the Conference Bridge.
2. When the voice prompt is heard, enter the Conference Bridge 1
or 2 password, and dial
L
.
3. Start the conference.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 7-1 (Card interface Slot Assignment) to assign
the CNF(8)-U10 ETU as an SLI ETU.
Use Memory Block 4-35 (Voice Mail/SLT Selection) to assign (YS)
the ports connected to the CNF(8)-U10 ETU as analog voice mail
ports to insure proper disconnect signals. Default is NO,
unassigned.
To start a conference call using outside DIT:
To start a conference call on an incoming CO call using an
Automated Attendant:
To start a conference call from an incoming CO call using an
Attendant:
To Next Page
Loading...