Features and Specifications Manual A - 71
Automatic Redial
A-23
FEATURE
DESCRIPTION
Automatic Redial simplifies repetitive dialing to a busy or unanswered
outgoing call. After a busy tone or no answer is received during a CO/PBX
call, the system periodically redials the party number while the station user
monitors the call for completion.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. When using the handset, press
P
, and restore the handset.
2. Press
T
.
3. Press
Q
.
4. The call is repeated automatically (default: 2 times).
5. Lift the handset to respond when the called party answers. When this
is not done, the call is disconnected when the next redial cycle starts.
Lift the handset, then restore handset, or press
P
.
- OR -
Automatic Redial is canceled automatically when the specified number of
redials (default: 2) is completed.
To set while receiving a busy tone or no answer on an outside
call:
To cancel Automatic Redial:
To Next Page
Loading...