A - 70 Automatic Number Indication (ANI) on T1
Issue 6 Electra Elite
When the scroll key is used, a maximum of 10 ANI/Caller IDs can be
stored in System Memory. When 10 ANI/Caller IDs are stored and an
additional call is received, the first ANI/Caller ID is erased from
System Memory. Press the Scroll key to display the stored ANI/Caller
IDs. When you go Off-hook, the displayed ANI/Caller ID is
automatically dialed. The LCR feature is required for the Automatic
Dial Out option.
Five users can use the Scroll function at the same time. When
additional users try to use the scroll, IN USE is displayed at their
Multiline Terminal.
When the Scroll key is not pressed and held down in five seconds,
the caller identification disappears from the LCD.
When an outgoing call is made via the Scroll function, the call follows
Code Restriction, Digit Restriction, and Least Cost Routing. The LCR
feature is required for the scroll function to operate properly.
ANI/Caller ID scrolling and automatic dial out features require
installation of the MIFM-U10 ETU with an attached KMM(1.0) U.
RELATED FEATURES
LIST
Feature
Number
Feature Name
C-5 Caller ID Indication (Analog Trunks)
I-6 ISDN-BRI Trunk Connections
I-7 ISDN-PRI Trunk Connections
L-3 Least Cost Routing (LCR)
To Next Page
Loading...