Features and Specifications Manual C - 61
Centralized Voice Mail
C-16
FEATURE
DESCRIPTION
Centralized Voice Mail allows two or more systems that are connected by
Analog or Digital T1 Lines to share one Voice Mail (VM) system. This feature
allows VM Box access from Intercom (ICM)/CO/Automated Attendant, VM
message LED indication, or Call forward – Off-Premise to a VM port. The Elite
system communicates Message Waiting (MW) LED, Mailbox and other
information using DTMF Signaling between two Elite systems.
System Software S5000 or higher is required.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
CTI/VP(4)/(8)/(12)/(16)-U10 ETU
VMS(2)/(4)/(8)-U10 ETU
FMS(2)/(4)/(8)-U10 ETU
DTI-U10/20 ETU
TLI(2)-U10 ETU
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify the
SLT ETU for Analog System or a VMS/FMS/CTI/VP ETU (using Page 3,
Line Key 3 or 4) for Digital Voice Mail systems. This memory block is
used only for the system that has Centralized Voice Mail.
Use Memory Block 7-2 (Telephone Type Assignment) to specify the
Digital Voice Mail ports. This memory block is used only for the system
that has Centralized Voice Mail.
Refer to the Voice Mail manuals.
To Next Page
Loading...