Features and Specifications Manual I - 3
Incoming Trunk Name or
Number Display
I-2
FEATURE
DESCRIPTION
Incoming Trunk Name or Number Display allows names or numbers to be
assigned to each trunk of the system. These names or numbers appear on
the Multiline Terminal LCD when receiving an incoming call.
System Software S2000 or higher is required for the Incoming Trunk
Name feature.
SYSTEM
AVAILABILITY
Terminal Type:
Any Multiline Terminal with LCD
Any TAPI Terminal
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 3-00 (Trunk Name/Number Assignment) to specify
the Name or Number for accommodated CO/PBX lines for display when
the line is seized or during an incoming call.
Use Memory Block 4-l8 (Station Name Assignment) to assign names to
telephone stations.
Use Memory Block 3-53 (Caller Name Indication Selection) to select TRK
to enable the incoming trunk Name display function.
Restrictions:
This display function is not available for ICM calls.
None
To Next Page
Loading...