Features and Specifications Manual A - 9
Add-On Conference
A-3
FEATURE
DESCRIPTION
Add-On Conference allows a conference call with a total of four parties with
various combinations of outside lines and stations. This increases efficiency by
allowing multiple parties to enter a conversation.
System Software S3000 or lower supports up to six, 4-party conferences
with no more than two outside lines per conference.
System Software S4000 or higher supports up to 16, 4-party conferences
with no more than two outside lines per conference.
SYSTEM
AVAILABILITY
Terminal Type:
All stations
Required Components:
None
OPERATING
PROCEDURES
1. Press
R
.
2. Dial a station number or outside party, and inform the answering party
of the conference.
3. Press
R
again. The
R
LED is on continuously. Talk with both
parties.
4. Repeat steps 1~3 to add an additional party to the conference.
1. Press the hookswitch to place the first call on hold.
2. Dial an internal station and announce conference.
3. Press the hookswitch again. Talk with both parties.
To initiate an Add-On Conference using a Multiline Terminal with
a call in progress:
To initiate an Add-On Conference using a Single Line Telephone
with a call in progress:
To Next Page
Loading...