NEC Electra Elite 48/192 - Automatic Trunk-To-Trunk Transfer

Features and Specifications Manual A - 79
Automatic Trunk-to-Trunk
Transfer
A-26
FEATURE
DESCRIPTION
Automatic Trunk-to-Trunk Transfer allows an incoming CO/PBX call to be
automatically dialed out of the system over another outside line to a
programmed telephone number. This is especially useful for forwarding calls
to an answering service during nonbusiness hours (i.e., nights, weekends, or
holidays).
SYSTEM
AVAILABILITY
Terminal Type:
Assigned Attendant Position Multiline Terminals with this ability.
Required Components:
None
OPERATING
PROCEDURES
1. Press
T
.
2. Dial
FC
.
3. Dial the incoming trunk number (
KA
~
FD
) .
4. Press
L
.
5. Dial outgoing telephone number where the call is to be directed.
6. Press
T
.
1. Press
T
.
2. Dial
FC
.
3. Dial the incoming trunk number
(
KA
~
FD
).
4. Press
L
.
To set the Trunk Forward Assignment from the Attendant
Position:
To cancel the Trunk Forward Assignment from the Attendant
Position: