Features and Specifications Manual D - 11
Dial 0 For Attendant
D-5
FEATURE
DESCRIPTION
Stations can access a system Attendant Position by dialing 0 (zero).
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Lift the handset or press
P
,
and wait for internal dial tone.
2. Dial
K
to call the Attendant (set at default).
3. Lift the handset to talk with Attendant.
1. Lift the handset, and wait for internal dial tone.
2. Dial
K
to call the Attendant (set at default).
3. Talk with the Attendant.
Data Assignment:
Use Memory Block 1-1-46 [Access Code (1-Digit) Assignment] to assign
0 as the Access Code.
Restrictions:
The system can have multiple Attendants. Only one can be called by
dialing 0. When that Attendant dials 0, an error tone is received.
Using a Multiline Terminal:
Using a Single Line Telephone:
To Next Page
Loading...