NEC Electra Elite 48/192 - Hold with Recall (Exclusive and Non-Exclusive

Features and Specifications Manual H - 9
Hold With Recall
(Exclusive and Non-Exclusive)
H-5
FEATURE
DESCRIPTION
A Station user can place a call on Hold to free the station for other calls. A
Multiline Terminal user can use Exclusive Hold (call picked up only where it
was put on hold) or Non-Exclusive Hold (call picked up at any station that has
access to that line). A Single Line Telephone user can place calls on Exclusive
Hold. A call on hold for longer than a preprogrammed interval generates a
recall at the originating station. When the recalled Multiline Terminal is idle, an
audible signal and an LCD indication (when equipped) are provided to indicate
that the line is recalling.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Press
U
.
2. To retrieve a Non-Exclusive Hold call, press the flashing line key or
Call Appearance Key.
1. Press
T
and then
U
.
2. To retrieve an Exclusive Hold call, press the flashing line key or Call
Appearance Key.
Using a Multiline Terminal with an outside call in progress
(Non-Exclusive Hold):
Using a Multiline Terminal with an outside call in progress
(Exclusive Hold):