Features and Specifications Manual A - 55
Automatic Callback
A-18
FEATURE
DESCRIPTION
After receiving a call waiting tone from a busy station, a user can set
Automatic Callback when allow (default: LED On) is selected using Page 1
LK3 of Memory Block 1-8-08 [Class of Service (Station) Feature Selection 2].
When both stations are idle, the system signals the Automatic Callback
originator first and, after the originator answers, signals the other station.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Dial Access Code
K
(set as default).
2. Hang up.
3. The originating station rings when both stations become idle.
4. Lift the handset or press
P
.
5. Receive tone burst or ringback tone; talk when the called station user
answers.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-2-24 (Intercom Feature Access Code Assignment)
to change the Access Code to one of the following:
,
, #, or 1~9 (default
4).
Use Memory Block 1-2-02 (Automatic Callback Release Time Selection)
to set the time allowed for Automatic Callback before the request is
automatically canceled (default: 30 minutes).
To use this feature after calling a busy station and receiving a
call waiting tone:
To Next Page
Loading...