Features and Specifications Manual N - 7
Night Chime
N-3
FEATURE
DESCRIPTION
Night Chime provides a common audible tone with one relay contact for
control when incoming CO/PBX calls are received in Night Mode. The relay
contact closures may also be used for external bells or chimes. The Night
Chime feature is used after working hours to alert night personnel for incoming
outside calls.
SYSTEM
AVAILABILITY
Terminal Type:
Not applicable
Required Components:
ECR-U10 ETU for common audible tone and control relay
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 2-08 (ECR Relay to Tenant Assignment) to specify
Tenant assignment (LED On) to External Tone Relay 1, 2, 3, 4, or Night
Chime function for the ECR Relay. Default is unassigned.
Use Memory Block 7-01 (Card Interface Slot Assignment) to specify the
ECR-U10 ETU.
Restrictions:
Tie/DID lines, DIT/ANA calls, and Automated Attendant do not activate
the Night Chime relay.
General:
An ECR-U10 ETU is required for common audible tone and control
relays. Ten relays are provided with this ETU. One relay is provided for
Night Chime control.
The Night Chime control relay is activated based on Night Mode of each
Tenant group.
None
To Next Page
Loading...