Features and Specifications Manual E - 1
Elapsed Call Time
E-1
FEATURE
DESCRIPTION
The Elapsed Call Time indicates how long the station has been connected to
an outside line. It is displayed on Multiline Terminals with an LCD.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals with an LCD
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
General:
The elapsed call time is shown on the LCD when a Multiline Terminal
user is talking on an outside line.
The maximum Elapsed Call Time is 99 minutes and 59 seconds. When
the time reaches this maximum, the display resets to 00 minutes and 00
seconds.
When a call is placed on hold (Exclusive or Non-Exclusive) or Transfer
Recall, the Elapsed Call Time continues.
When a transferred call is answered, the Elapsed Call Time is reset to
00:00.
For outgoing CO/PBX calls, the starting time is set at 20 seconds
(default) after the last digit is dialed. For incoming outside calls, the
starting time is immediate. However, there is a five second delay after
the call is answered.
The starting time for outgoing Tie line calls is when the called party
answers the call.
The Elapsed Call Time display clears during dialing and returns five
seconds after the last digit is dialed.
Not applicable
To Next Page
Loading...