Features and Specifications Manual P - 7
Pooled Line (Outgoing)
P-3
FEATURE
DESCRIPTION
Pooled Line (Outgoing) allows Multiline Terminal users to seize an outside line
on one Pooled line key. One Pooled line key can accommodate a Trunk group
or Route Advance Block.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Press the Pooled line key, and wait for outside line dial tone.
2. Dial the desired telephone number.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 2-05 (Line Key Selection) to select the TEL
(Telephone Mode) or TNAT (Tenant Mode) line key assignment for each
Tenant. Default is TEL.
Use Memory Block 2-06 (Line Key Selection for Tenant Mode) to assign
a pooled line to a CO/PBX line key on each telephone in a Tenant
assigned to Tenant Mode.
Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to
assign a pooled line to a CO/PBX line key on each telephone in a Tenant
assigned to Telephone Mode.
Use Memory Block 3-03 (Trunk-to-Trunk Group Assignment) to assign a
Trunk Group Number to each CO/PBX line.
Restrictions:
A Pooled Line (Outgoing) cannot receive incoming calls.
To originate an outside call:
To Next Page
Loading...