P - 8 Pooled Line (Outgoing)
Issue 6 Electra Elite
General:
A maximum of 48 pooled groups are allowed per system. Each
pooled group corresponds to a Trunk Group number (1~32) or a
Route Advance Block number (1~16).
Pooled Line LED indicates the status of the pooled group as follows:
On: All trunks in the pooled group are in use.
Off: Some or all trunks in the pooled group are idle.
When an idle Pooled line key is pressed, an idle trunk belonging to
that pooled group is automatically selected. When the Electra Elite
48/192 system is designated as KF registration, this feature is not
available.
A user on a Pooled Line can access Call Park - System, Call
Transfer, and Conference.
Trunk Queuing can be set when the Pooled line key is busy (red
LED).
When a trunk is selected from Pooled line key, it appears on a CO
line key or on a Call Appearance (CAP) key on the Multiline Terminal.
To Next Page
Loading...