NEC Electra Elite 48/192 - Introduction; Section 1 General Information; Section 2 Multiline Terminals Used With The System

Features and Specifications Manual 1 - 1
Introduction
Chapter 1
SECTION 1
GENERAL
INFORMATION
Electra Professional, Electra Elite, and D
term
®
Series E telephones can be
used with the Electra Elite 48/192 systems.
SECTION 2
MULTILINE
TERMINALS
USED WITH THE
SYSTEM
Electra Elite and D
term
Series E Terminals
DTU and DTP terminals are available in black or white: two 8-line types
(display and non-display), two 16-line types (display and non-display), and two
32-line types (display and non-display). A two-line non-display type is
available in white. Speakerphones with full handsfree operation and headset
jacks are standard. The large Liquid Crystal Display (LCD) on the display
terminals provides call status data and programming information.The D
term
Handset Cordless terminal is a 16-button phone (display only). For Attendant
Positions, an Attendant Add-On DCU-60-1(BK)/(WH) CONSOLE is available
for 60 station and/or outside line assignments and 12 function keys.
An SLT Adapter can be used in place of a digital terminal for connecting Single
Line Telephones, or similar devices.
Electra Professional Terminals
Electra Professional terminals are available in dark gray or soft white: an 8-line
non-display type, two 16-line display types (with and without DSS/BLF keys),
and a 24-line display type with DSS keys. Speakerphones are standard,
providing full handsfree operation. The large Liquid Crystal Display (LCD)
provides call status data and programming information. For Attendant
Positions, an Attendant Add-On Console is available for 48 station and/or
outside line assignments and 12 function keys.
An SLT Adapter can be used in place of a digital terminal for connecting Single
Line Telephones, or similar devices.
Feature Access, Single On/Off, or One-Touch Keys