Features and Specifications Manual I - 7
Internal Voice/Tone
Signaling
I-4
FEATURE
DESCRIPTION
Internal Voice/Tone Signaling allows a Multiline Terminal user to be signaled
on incoming internal calls by voice announcement or by ringing, depending on
System Programming. The caller can dial an additional digit to switch a voice
announcement call to a ringing call, or switch a ringing call to voice
announcement. This feature allows Voice/Tone switching from the calling side
only.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Lift the handset, and wait for internal dial tone.
2. Dial the station number.
3. Receive voice page alert tone.
4. Voice announce the call.
5. Called party can reply handsfree.
- OR -
Dial
A
(set as default). (Called party lifts the handset to respond to
ringing.)
When programmed for Voice/Tone:
To Next Page
Loading...