Features and Specifications Manual A - 39
Attendant Positions
A-13
FEATURE
DESCRIPTION
Any number of stations can be designated an Attendant Position. These
stations have access to distinct Attendant-type features. Two Attendant
Positions can support two Attendant Add-On Consoles each. Programming
for Attendant features such as setting Night Mode and System Speed Dial
memory apply.
SYSTEM
AVAILABILITY
Terminal Type:
Any Multiline Terminal with display programmed as an Attendant Position
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 4-17 (Station to Class of Service Feature
Assignment) to assign the first two station ports, 01 and 02, as Attendant
Positions.
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
Selection 1] Page 1 LK8 to allow (LED On) or deny (LED Off) attendant
features to any station.
Restrictions:
A maximum of four Attendant Add-On Consoles can be assigned to one
Attendant Position.
A maximum of four Attendant Add-On Consoles can be assigned in the
system.
Up to four Attendant positions can have an Attendant Add-on Console.
Provided under specific Attendant feature descriptions.
To Next Page
Loading...