Features and Specifications Manual A - 25
Answer Key
A-9
FEATURE
DESCRIPTION
Multiline Terminals have an Answer key with an LED that flashes when the
Multiline Terminal user receives an incoming CO/PBX, Tie/DID transfer, or
CO/PBX transfer call ringing in the same tenant group. When multiple calls
are received, the Answer key is used to pick up calls. The Answer key
continues flashing until the last unanswered call is answered. Press the
Answer key during a call to hold the current call and allow the next call to be
answered.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Receive CO/PBX incoming ring.
O
LED flashes.
2. Press
O
. The
O
LED goes out.
3. Talk with the CO/PBX incoming calling party.
4. When additional CO incoming calls are received, the
O
LED
flashes again. Press
O
to place the current call on Non-
Exclusive Hold and connect the Multiline Terminal user to the next
call.
a. An original call on a Call Appearance Key is placed on
Non-Exclusive Hold on the Call Appearance Key.
b. An original call on a line key is placed on Non-Exclusive Hold
on the line key.
To answer calls using the Answer key:
To Next Page
Loading...