NEC Electra Elite 48/192 - Off-Hook Ringing

Features and Specifications Manual O - 1
Off-Hook Ringing
O-1
FEATURE
DESCRIPTION
Off-Hook Ringing alerts a Multiline Terminal user that an incoming outside call
is ringing to that station during another call. Off-Hook Ringing is provided
through the built-in speaker of the Multiline Terminal and at a lower volume
than On-Hook Ringing.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Go off-hook with the handset.
2. Dial the Access Code (default:
FK
).
3. Dial
A
from the dial pad.
4. Press press
M
(
^
= increase) or (
v
= decrease) to increase/decrease
off-hook ringing volume.
5. Go on-hook.
SERVICE
CONDITIONS
Data Assignment:
 Use Memory Block 4-51 (Off-Hook Ringing Selection) to assign Off-Hook
Ringing per station (default: YS).
 Use Memory Block 1-1-46 [Access Code (1-Digit) Assignment] and
1-1-47 [Access Code (2-Digit) Assignment] to set the access code
(default: 60) for Volume/LCD Control.
Restrictions:
 Off-Hook Ringing is not provided when the Multiline Terminal speaker is
activated or when the terminal is in Do Not Disturb (DND) mode.
To set off-hook ringing volume: