M - 6 Microphone Control
Issue 6 Electra Elite
When the MIC LED is on:
1. Press
T
.
2. Dial Access Code
A
.
3. The MIC LED goes off.
SERVICE
CONDITIONS
General:
The microphone is activated when the MIC LED is on, and an internal
voice signal call is made to a Multiline Terminal.
When full handsfree is denied in System Programming, Handsfree
Dialing/Monitoring does not activate the microphone.
The microphone status is indicated by the LED located at the top of
the dial pad labeled MIC (not the Flexible Line key, when assigned).
When the MIC LED is on, the microphone is on.
RELATED FEATURES
LIST
Feature
Number
Feature Name
F-8 Full Handsfree Operation
H-2 Handsfree Answerback
To Next Page
Loading...