C - 78 CO/PBX, Tie Line Digit Restriction
Issue 6 Electra Elite
General:
Trunk Digit Restriction applies to all CO/PBX lines.
Digits 0~9,
,
, and # are counted as digits dialed; pauses are not
counted.
To reset the digit counter, the outside line must be released.
Press the Recall or Drop key to reset the digit counter. (A Drop key is
provided by programming a Feature Access Code on a Feature
Access key or One-Touch key.)
Press Feature Access or One-Touch key (programmed for
hookflash) to reset the digit counter.
When the outside line is put on hold, the digit counter retains the
number of digits dialed. When a station user picks up the held line,
digit counting continues.
RELATED FEATURES
LIST
Feature
Number
Feature Name
C-19 Code Restriction
To Next Page
Loading...