S - 6 Scrolling Directories
Issue 6 Electra Elite
The LCD displays the name(s) starting with N. The user can then
scroll down to the applicable name and make a selection.
Dial Pad 0~9 is valid for searching. The following shows the relation
between Dial Pad and Alphabet/Digit:
• Dial Pad 0 0
• Dial Pad 1 1
• Dial Pad 2 ABC2
• Dial Pad 3 DEF3
• Dial Pad 4 GHI4
• Dial Pad 5 JKL5
• Dial Pad 6 MNO6
• Dial Pad 7 PQRS7
• Dial Pad 8 TUV8
• Dial Pad 9 WXYZ9
When the system is programmed as Key Function, select a number
in the display, and press an idle trunk line key to dial it.
When the user is viewing the directory to select the number to be
dialed, an incoming call to that station is treated in the same way as
a call to a User Programming Mode station.
Scrolling mode is canceled when one of the following keys is
pressed: Hold, Transfer, Answer, Redial, One-Touch, or Feature
Access.
Key operation is ignored when Conf or Recall is pressed during
scrolling.
A maximum 12 characters are displayed in the Multiline Terminal
LCD when the system is programmed for 1000 System Speed Dial
numbers.
A maximum 13 characters are displayed in the Multiline Terminal
LCD for Station Speed Dial or when programmed for 100 System
Speed Dial numbers.
When the stored name/number exceeds 12 or 13 characters, only
the first 12 or 13 characters are displayed in the Multiline Terminal
LCD.
To Next Page
Loading...