Electra Elite Issue 6
Features and Specifications Manual S - 69
Key Function:
1. Press the desired CO/PBX line key.
2. Press
Q
.
3. Dial the Speed Dial buffer number (
KK
~
GI
or
KKK
~
III
).
Multifunction (Dial Access):
1. Press
Q
.
2. Dial the Speed Dial buffer number (
KK
~
GI
or
KKK
~
III
).
Key Function:
1. Press the desired CO/PBX line key.
2. Press the desired Feature Access or One-Touch key.
Multifunction (Dial Access):
Press the desired Feature Access or One-Touch key.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-1-02 (Hookflash Time Selection) to specify the
loop open time (default: 600 ms.) for a hookflash to the CO/PBX
when the Recall key is pressed on a Multiline Terminal.
General:
This feature is available on all Multiline Terminals.
Stored Hookflash is effective on Loop Start and Ground Start trunks
when the system is installed behind a PBX or Centrex system.
A hookflash can be stored in System and Station Speed Dial buffers.
To use the Speed Dial buffer with Stored Hookflash using a
Multiline Terminal:
To use Feature Access or a One-Touch key programmed for
Station Speed Dial with Stored Hookflash at a Multiline Terminal:
To Next Page
Loading...