G - 2 General Purpose Relays
Issue 6 Electra Elite
1. Press
T
and dial
K
.
2. Dial the relay number
K
or
A
(for GPR0 or GPR1).
3. Press
T
.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-6-05 (Attendant Add-On Console Key
Selection) to assign GP Relay functions to Attendant Add-On
Console keys. Default is TEL01.
Use Memory Block 1-7-07 (External Ring Relay Pattern Selection) to
select a distinctive ringing pattern (default: Pattern 3) for relays.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 1 LK 7 to allow (default: LED On) or deny (LED
Off) the General Purpose relay feature.
Use Memory Block 1-8-37 (General Purpose Relay Assignment) to
specify whether (YS or default: NO) the relays on the ECR-U10 ETU
are to be used.
Use Memory Block 2-08 (ECR Relay to Tenant Assignment) to
specify Tenant Assignment for External Tone Ring/Night Chime
function. Default is not assigned.
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify
the ECR-U10 ETU.
General:
The General Purpose relays are rated for 24 Vdc at 500 mA.
The red LED indication is provided to indicate on or off when the GPR
Access Codes are assigned to a Feature Access key.
The LED indication is provided to all Feature Access keys and
Attendant Add-on Consoles that are assigned to GP Relay 0 or GP
Relay 1 functions.
To toggle the relay from on to off (or off to on):
To Next Page
Loading...