Electra Elite Issue 6
Features and Specifications Manual W - 9
Selection 2] to enable Page 1 LK1, Page 2 LK5, Page 3 LK3, Page 3
LK8, Page 4 LK3, Page 4 LK4, Page 5 LK4, Page 5 LK7 to allow Call
Forward functions and Caller ID/ANI.
Use Memory Block 4-17 (Station to Class of Service Feature
Assignment) to enable/disable features per station.
Restrictions:
A maximum of 8 BSU(2)-U10 ETUs can be installed in the Electra
Elite 192 System in slots S1 through S8.
A maximum of 40 D
term
PS II stations can be assigned to the Electra
Elite 192 System.
A maximum of 16 Zone Transceivers (ZT II) can be installed in the
Electra Elite 192 System.
A maximum of 3 BSU(2)-U10 ETUs can be installed in the Electra
Elite 48 System in slots S3 through S6.
A maximum of 24 D
term
PS II stations can be assigned to the Electra
Elite 48 System.
A maximum of 6 Zone Transceivers (ZT II) can be installed in the
Electra Elite 48 System.
General:
Refer to the Electra Elite 48/192 Features and Specifications Manual
for the features being used on the D
term
PS II.
To Next Page
Loading...