Electra Elite Issue 6
Features and Specifications Manual B - 15
General:
A single color LED (red only) is used to indicate the following station
status:
Local power is not required for the BLF function on a Multiline
Terminal. The Attendant Add-On Console requires an AC
transformer that is provided with the console.
Assignment of One-Touch keys for Direct Station Selection (DSS)
with busy lamp indications is programmable by the user from an
ETW-16DD-1/2(BK)/(SW), DTP/DTU-32-1(BK)/(WH) TEL, DTP-32D-
1(BK)/(WH) TEL, or DTU-32D-2(BK)/(WH) TEL Multiline Terminal.
Any existing station can be assigned.
LED is Flashing: Station is in Do Not Disturb (DND) or Call
Forward - All Call, Break Mode.
LED is Winking: Station is Off-Line (to program). Station is
accessing Feature functions.
LED On: Station is busy, receiving Voice Announcement,
receiving Internal/DIT/ANA/TIE/DID ringing signal,
or was put on hold.
LED Off: Station is idle, receiving CO/PB call, receiving CO/
PBX transferred call, or receiving recall.
To Next Page
Loading...