C - 14 Callback Request
Issue 6 Electra Elite
1. Press
P
or lift the handset.
2. Dial the number to be called back, or press
L
.
3. Lift the handset to talk when the party answers.
4. Hang up.
1. Press
P
or lift the handset.
2. Press
L
(set as default).
3. Lift the handset to talk.
4. Hang up.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-2-24 (Intercom Feature Access Code
Assignment) to change the Access Code to one of the following:
,
,
# (default), 1~9, or 0.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 2 LK2 to Allow (Default: LED On) or Deny (LED
Off) Callback Request Originate at all stations. A Callback Request
can be set to one or more Multiline Terminals regardless of tenant
assignment.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 4 LK3 to Allow (LED On) or Deny (default: LED Off)
ANI/Caller ID.
General:
Multiline Terminals without display receive an indication of the
Callback Request by a Feature LED that flashes 0.25 seconds On,
0.25 seconds Off.
When a Multiline Terminal receives two or more Callback Requests,
they are called back in the order they were received. Multiline
Terminal users can go off-hook and dial # (as set in default) to call the
station user that left a Callback Request.
A maximum of three Callback Requests can be set at one Multiline
Terminal.
To Callback from a Multiline Terminal with LCD:
To Callback from a Multiline Terminal without LCD:
To Next Page
Loading...