C - 18 Caller ID Indication (Analog Trunks)
Issue 6 Electra Elite
Press the Scroll Key until the desired number to be called back is
displayed. While the number is displayed, go off hook. The system
automatically accesses an outside line and dials the displayed number.
SERVICE
CONDITIONS
Data Assignment:
Caller ID Indication (Analog Trunks)
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify
the COID(4)-U10, COID(8)-U10, COIB(4)-U10 or MIFM-U10 ETU.
Use Memory Block 1-1-78 (Caller ID Display Assignment for System
Mode) to assign up to 15 Multiline Display Terminals to display Caller
ID indication for incoming calls.
Use Memory Block 4-49 (Caller ID Display for CAR Key Assignment)
to assign one Multiline Terminal per CAR Key to display Caller ID
indication for incoming calls.
Use Memory Block 3-44 (Caller ID Display Assignment for CO/PBX
Line) to assign the Caller ID Display for normal incoming CO/PBX
calls.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 4 LK3 to Allow (LED On) or Deny (default: LED Off)
Caller ID.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 4 LK4 to Allow (LED On) Caller ID Number display
or Deny (default: LED Off) to display the Caller ID Name, when Name
and Number are received.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 5 LK7 to Allow (LED On) or Deny (default: LED Off)
display of both the name and number. System Software S4000 or
higher is required. Both the name and number must be received
from the network providing the analog trunks. Page 4 LK4 selects
the position of the name or number on the Display for stations
assigned to the Class of Service. When Page 4 LK4 is On, the
number is displayed on the top line of the display. When Page 4 LK4
is Off, the name is displayed on the top line of the display.
Use Memory Block 4-17 (Station to Class of Service Feature
Assignment) to make each station Class of Service Assignment.
To return a call to the number displayed on the LCD using the
Scroll Key:
To Next Page
Loading...