C - 22 Caller ID Indication (Analog Trunks)
Issue 6 Electra Elite
Scrolling Caller ID with Return Call
When the Scroll key is used, a maximum of 10 Caller IDs can be
stored in System Memory. When 10 Caller IDs are stored and an
additional call is answered, the first Caller ID is erased from System
Memory. Press the Scroll key to display the stored Caller IDs. When
you go Off-hook, the displayed Caller ID is automatically dialed. The
LCR or ARS feature is required for the Automatic Dial Out option.
When Scroll key is not pressed and held in five seconds, the LCD
returns to idle, and Caller ID disappears.
When an outgoing call is made using the Scroll function, the call
follows Code Restriction, Digit Restriction, and Least Cost Routing
(LCR) or Automatic Route Selection (ARS). The LCR or ARS feature
is required for the Scroll function to operate properly.
Caller ID data is not stored when the following conditions apply:
• COIN Caller ID is sent from a pay phone.
• Out of Area Data is sent from a CO that cannot process
Caller ID data.
• Private Calling party disables Caller ID information for
the called party.
• Data Error The data stream includes an error.
When Out of Area or Private characters are received, the MIFM-
U10 ETU does not store them in the Scroll Key buffer.
RELATED FEATURES
LIST
Feature
Number
Feature Name
A-22 Automatic Number Indication (ANI) on T1
A-25 Automatic Route Selection (ARS)
C-17 Class of Service
D-15 Do Not Disturb (DND)
I-6 ISDN-BRI Trunk Connections
I-7 ISDN-PRI Trunk Connections
L-3 Least Cost Routing (LCR)
To Next Page
Loading...