C - 24 Caller ID Call Return
Issue 6 Electra Elite
3. When Caller ID information is available after the Caller ID
number is played, the system prompts the mailbox user with an
option to return the call.
- OR -
During message playback dial
LK
, and when the voice mail
prompts to return the call dial
A
for yes.
To repeat the Caller ID number during playback, dial
L
. To skip to the
end of the Caller ID number dial
J
.
4. To end a Return Call, dial
LKJ
to return to the mailbox
and disconnect the outside call.
1. Dial the EliteMail extension.
2. During message playback, EliteMail displays Caller ID name or
number only depending on system programming. To change
display between Name and Number, press
V
(MORE) Softkey
twice then press
V
(CID) Softkey.
- OR -
Dial
K
during message to stop playback, save the current
message as an old message, and hear Caller ID number only.
When
K
is dialed, you can dial
L
to repeat the Caller ID number or
dial
J
to skip to the end of the number.
3. During playback, using a mailbox that allows the option, press
the
V
(MORE) Softkey three times then press the
V
(CALL)
Softkey to return the call.
4. To end a Return Call, press the
V
(END) Softkey to return to the
mailbox and disconnect the outside call.
Caller ID Information Operation on Display Telephone with
Softkeys:
To Next Page
Loading...