NEC Electra Elite 48/192 - Page 153

C - 34 Call Forward - Busy/No Answer
Issue 6 Electra Elite
1. Lift the handset.
2. Dial Access Code
DD
.
3. Go on-hook.
1. Lift the handset or press
P
.
2. Dial Access Code
DE
(default).
3. Dial the station number to be forwarded and then the destination
number.
4. Wait for confirmation tone, and restore the handset or press
P
.
1. Lift the handset or press
P
.
2. Dial Access Code
DF
(default).
3. Dial the station number where forwarding is to be canceled.
4. Wait for the confirmation tone, and restore the handset or press
P
.
1. Press
T
.
2. Dial Access Code
FH
.
3. Press
T
.
SERVICE
CONDITIONS
Data Assignment:
 Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
Assignment] to assign Access Codes to set or cancel Call Forward -
Busy/No Answer. Default Access Codes are not assigned.
To cancel Call Forward - Busy/No Answer at an SLT phone:
To set at a destination station (Attendant Positions only):
To cancel at a destination station (Attendant Positions only):
To cancel Call Forward - All Call, Busy/No Answer, and Do Not
Disturb system-wide at the Attendant Position only: