C - 90 Customized Message
Issue 6 Electra Elite
1. Press
T
.
2. Dial
GI
.
3. Press
T
.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-2-9~18 (Customized Message 1~10
Assignment) to program a maximum of 10 messages.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 1 LK1 to Allow (default: LED On) or Deny (LED Off)
DND.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 2 LK1 to Allow (default: LED On) or Deny (LED Off)
the Absence Message.
Restrictions
DND must be set to display the message.
A maximum of 13 characters and the return time can be set for each
message.
General:
Six messages are provided in default. All 10 can be programmed.
Default messages are as follows:
• DO NOT DISTURB
•MEETING
• BUSINESS TRIP
•NOT IN
•WITH GUEST
• OUT OF OFFICE
The message remains on the LCD where the message was set.
When this feature is set, the Feature LED flashes.
When calling a station in Do Not Disturb mode, a message displays
on the caller terminal. Three seconds later, the return date and time
are displayed.
To cancel a message at a Multiline Terminal:
To Next Page
Loading...