A - 2 Account Code Entry
Issue 6 Electra Elite
4. Enter the Account Code using the dial pad.
5. Retrieve the held call.
1. Press the hookswitch, and wait for a new internal dial tone; the
outside party is put on hold.
2. Dial Account Code Entry Access Code XX (no default assigned).
3. Enter the Account Code using the dial pad.
4. Use a hookflash to return to the held call.
QUICK ACCESS
CODE REFERENCE
SERVICE
CONDITIONS
Data Assignment
Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
Assignment] to specify or change the Account Code Entry Access
Code (no default assigned) that is used after a call is put on hold.
Use Memory Block 7-1 (Card Interface Slot Assignment), to specify
the MIFM-10 ETU.
Account Codes can be programmed to a Feature Access or
One-Touch key on any Multiline Terminal.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 3 LK6 to allow (LK ON) Account Code Entry.
Restrictions
An Account Code cannot be entered when a station is part of a
conference supported by the system.
An Account Code cannot be entered if a hookflash results in a
conference when a Single Line Telephone has a call on hold and
another call is in progress.
During Account Code Entry, Call Alert Notification is not provided.
From a Single Line Telephone with an outside call in progress:
Default Access Code Name
Alphabetic
Designation
66 Feature Access Code (Fixed) N/A
To Next Page
Loading...