D - 36 Direct Inward Terminatio n(DIT)
Issue 6 Electra Elite
Use Memory Block 3-63 (DIT Weekend Mode Selection) to enable
holiday mode check on Tenant Groups for incoming DIT calls.
Default is YS. System Software S4000 or higher is required.
Use Memory Block 3-64 (DIT Night Mode Delay Answer Selection) to
determine whether (YS) or not (NO) the DIT delay answer time
applies to CO/PBX calls received in night mode. Default is NO.
System Software S4000 or higher is required.
Incoming DIT calls follow the station Call Forward setting.
Restrictions:
Incoming DIT calls cannot be answered directly at the CO line key
appearance. The CO line key indicates Other Use (red LED).
A DIT call does not activate External Tone Ringer or Night Chime.
General:
When an idle station programmed for DIT receives an incoming DIT
call, internal ring tone is heard at the station(s) where a Secondary
Incoming Extension is assigned to ring.
DIT incoming ringing is assigned for Distinctive Ring or Synchronous
Ring system-wide.
When a busy station programmed for DIT receives an incoming DIT
call, the system provides Camp-On tone for the busy station. The
calling party receives ringback tone until the call is answered.
When a busy station receives an incoming DIT Camp-On tone, the
existing call can be terminated, held (including Call Park),
automatically held, or transferred to enable the station user to answer
the incoming DIT call.
RELATED FEATURES
LIST
Feature
Number
Feature Name
A-8 Answer Hold
C-1 Call Alert Notification
To Next Page
Loading...