D - 56 Drop Key
Issue 6 Electra Elite
1. Press the Feature Access or One-Touch key programmed as a
Drop key.
2. Receive new CO/PBX dial tone.
3. Dial the desired number.
SERVICE
CONDITIONS
Restrictions:
The Drop key provides a timed disconnect signal on CO/PBX lines.
The time of a disconnect signal is fixed at 1.5 seconds and cannot be
changed by System Programming.
The Drop key cannot be used for internal, DID, or Tie line calls.
General:
When on a CO/PBX call, you can press the Feature key and dial 5 to
use the Drop key feature.
RELATED FEATURES
LIST
To use the Drop key from a Multiline Terminal with a CO/PBX call
in progress:
Feature
Number
Feature Name
R-1 Recall Key
To Next Page
Loading...