Electra Elite Issue 6
Features and Specifications Manual D - 61
1. When interference interrupts a call, press channel.
2. The talk/battery low LED flashes to indicate that the telephone is
switching to another channel.
Note:Factory set channels (30) are provided for switching.
Note:This feature operates only when the telephone is in use.
1. When you receive a call during conversation, press flash to
access the new call.
2. Press flash to return to the previous call.
1. Press page/find on the Base.
2. The handset beeps for 5 seconds.
3. Press and hold page/find for more than 2 seconds to get a
continuous beep from the handset for 1 minute.
4. Hold page/find down for more than 1 minute, and the handset
beeps until page/find is released.
5. Press talk to end the page.
6. Press talk again to make a call.
Note:This feature does not work when the telephone is in use.
To select a different channel:
To access Call Waiting:
To use page/find feature to locate the handset:
To Next Page
Loading...