Electra Elite Issue 6
Features and Specifications Manual D - 77
1. Press TALK.
icon is displayed.
2. Dial Station Number.
- OR -
Press (F1~F4) programmed for Direct Station Selection (DSS).
3. Announce call after tone burst or wait for call to be answered.
1. When the handset is in the charger, lift it.
icon is displayed.
2. When the handset is out of the base unit, press TALK if ringing
line preference is assigned.
icon is displayed.
3. Talk.
With a call in process, press HOLD.
Note: To retrieve a held call, press flashing F1~F4.
Note: After a programmed time, the held call recalls to the originating terminal.
1. Press
Q
.
2. The previously dialed number is called.
1. With a call in process, press TRANSFER.
2. Dial Station Number.
- OR -
Press (F1~F4) programmed for Direct Station Selection (DSS).
3. Announce call (optional).
4. Press TALK to complete transfer.
To place an outside call:
To answer an Incoming Ringing Call:
To place a call on Hold (internal or outside):
To redial a Number:
To transfer a call:
To Next Page
Loading...